Turntable Pro-ject Xtension 10 Evolution (Cartridge not included)
Regular price
€3.999,00
VAT included in price for European Union countries and may be adjusted based on delivery country at check-out.
Average shipping time : 4 to 5 weeks. Shipping is free within European Union (except for specific territories) above 99€ purchase up to 50kg. Shipping costs on quote above 50kg – quote request to be send to : contact@audiosoundmusic.com. There is no return policy for countries outside of the European Union.
The Xtension 10 Evolution is a High-end turntable with 10“ tonearm with Superlative vinyl performance in a more compact size!
Tonearm, Clamp and Dustcover included
Cartridge not included
The Xtension 10 chassis Is made from MDF filled with metal sand, that gives high mass and is non-resonant. Magnetic feet, which decouple the main plinth from its base, are combined with a weighty 22 kg total turntable mass. With these two magnets located in the feet, the turntable is practically floating.The result is a unique combination of ‘mass loaded’ and ‘floating turntable’ design principles. Instead of the old standard adoption of pure metal used for the main platter, we’ve found a perfect alloy which we damped on the inner side with Sorbothane®. Additionally we’ve glued recycled Vinyl records to the top (which act as a perfect mat) and bake this ‘sandwich’ before precision balancing it. The final product subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultrasilently on an inverted ceramic ball bearing with magnetic suspension. The Pro-Ject 10” Evolution with its tonearm base also benefits from ‘high-mass’ technologies, and is isolated from the main board by a sheet of Sorbothane®. To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14 Grams it comes with a set of 4 different Sorbothane®- damped counterweights.
NOTE: The signal source and the receiving device have to be equipped with balanced connections. Transmission of audio signals in a balanced mode reduce the influence of interference due to external stray electric fields significantly.
Features:
- Super-heavy 22 kg belt drive turntable
- Mass loaded magnetic floating subchassis
- Precision balanced sandwich-platter
- Inverted ceramic ball bearing with magnetic support
- Heavy weight record clamp
- Extremely low level of natural resonance
- Perfect decoupling through magnetic feet
- Electronic speed control 33/45/78 Upm
- Tonearm 10cc Evolution made from carbon fibre
- Inverted tonearm bearings (ABEC 7 quality)
- Dust cover included
- Speed: 33, 45, 78 (electronic speed change)
- Principle: Belt drive
- Platter: 10.3 kg/300 mm aluminium (TPE damped)
- Main bearing: Inverted stainless steel with ceramic ball with antimagnetic support
- Wow & flutter: ± 0.01% (max)
- Speed variance: ± 0.09% (max)
- Signal to Noise: 73 dB
- Cartridge weight range: 4 - 14 g (4 different counterweights included)
- Included accessory: Power supply, dust cover
- Power consumption: 2 Watts
- Dimensions: 480 x 235 x 400 mm (WxHxD)
- Weight: 26 kg net
Tonearm 10cc Evolution:
- The headshell and armtube are fashioned from a single piece of carbon-fibre.
- Conical armtube avoids standing wave reflections
- Inverted bearing design with four ABEC7 spec ballraces.
- Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.
- Sorbothane® -damped counterweight effectively counteracts unwanted resonances.
- Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.
- Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- Straight armtube reduces toe-in error.
- Silicone-damped armlift can be adjusted to suit arm height.
- The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
- Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw.
- Headshell: 0.5” (12.7 mm) standard
- Mounting distance: 238 mm (platter - tonearm base)
- Supplied counterweights: suitable for cartridges weighing between 4 - 6 g, 5 - 8 g, 6 - 10 g or 8 - 14 g
- Optional counterweights: suitable for cartridges weighing between 15 - 20 g or 16 - 22 g
- Downforce range: 10 - 35mN
- Effective length: 10” (254 mm)
- Effective mass: 8.5 g
- Overhang: 16 mm
- Weight: 269 g (without counterweight)
In the box:
- Xtension 10 Evolution
- Connect it 5P-C RCA Cable (Upgrade option: 5P-XLR)
- Dust cover
- Adapter for 7“ singles
- Record puck
- Counterweights for 4-14g cartridges
- Power supply, allen key, spirit level, gloves
Option : On customer's site installation and set-up within European Union
After delivery of the product, one of our team members will take an appointment at the address of delivery to install your equipment, and make sure it is properly set-up.
To buy an installation service please click here