Limited manual turntable Pro-Ject Debut III with Ortofon OM5e cartridge (Clamp not included)
Sale price
€329,00
Regular price
VAT included in price for European Union countries and may be adjusted based on delivery country at check-out.
Average shipping time : 4 to 5 weeks. Shipping is free within European Union (except for specific territories) above 99€ purchase up to 50kg. Shipping costs on quote above 50kg – quote request to be send to : contact@audiosoundmusic.com. There is no return policy for countries outside of the European Union.
Tonearm, Cartridge & Dustcover included
Clamp not included
Turntable:
- A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
- The medium density fibre plinth stands on four feet which act as shock absorbers.
- The motor is decoupled from the plinth to reduce vibration transmission.
- The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.
- The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing.
- External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6:
- The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
- Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
- The headshell and undamped armtube are fashioned from a single piece.
- The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.
- Flexible counterweight shaft avoids vibration at undesirable frequencies.
- The counterweight supplied is suitable for cartridges weighing between 3 - 5,5g. Alternative counterweights for cartridges weighing between 1,5 - 3g or 6 - 9g are available as an accessory part.
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
- A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III /Phono to any line level/auxiliary input (Computer, Midi System, Mixer etc.).
- Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Phono Pre-amplifier
- Optimal channel separation through dual-mono circuitry
- Digitalisation of analogue signals for recording direct to disk via USB with suitable recording programs
- Runs on Windows XP ®, Windows Vista®, Windows 7® and Mac OS operating systems
Technical specifications Phono Pre-amplifier - A/D converter
- Noise floor: 88dB
- THD: 0,005%
- Input impedance: 47kohms/100pF
- Power consumption: 16V/40mA AC
- Gain: 32dB
- Output voltage typically: 160mV/1kHz at 4mV/1kHz
- RIAA-equalisation curve accuracy: > 0,5dB/20Hz - 20kHz
- USB output: digital serial data protocol USB 1.1
Features:
- Principle: rigid plate
- Motor: suspended at four points
- Drive: flat belt
- Shift from 33T to 45T: manual by moving the belt on the motor pinion
- Arm: Pro-Ject one-piece aluminium
- Arm length: 218.5 mm
- Speed stability: +/-1.5
- Flutter: +/-0.25
- Signal to noise ratio : -65 dB
- Platter: 1.3 kg steel
- Motor: 16 V synchronous with separate power supply
- Cartridge: OM 5e
- Accessories: cover, phono cable
- Dimensions: 415 x 112 x 335 mm
- Weight: 3.7 kg