Edith Piaf - 23 Classiques inoubliables (2LP, DMM, Vinyle rose)
ORDER LIMITED TO ONE ITEM PER CUSTOMER
COMPILATION
Edith Piaf – Vocal [click here to see more vinyl featuring Edith Piaf]
Charles Dumont – Vocal (C6)
2LP, Gatefold jacket
Limited to 1,000 copies
Original analog Master tape : YES
Direct Metal Mastering
Heavy Press : 180g
Record color : Pink Blossom Vinyl
Speed : 33RPM
Size : 12'’
Stereo
Studio
Record Press : unspecified
Label : Vinyl Passion
Original label : Remember
Originaly released in 2012
Reissued in December 2023
Tracks :
Side A:
- Non, je ne regrette rien
- Milord
- La vie en rose
- Les trois cloches
- L'accordéoniste
Side B:
- Hymne à l'amour
- Sous le ciel de Paris
- La goualante du pauvre Jean
- Padam... Padam
- Mon Dieu
- Exodus
Side C:
- Bravo pour le clown
- Mon légionaire
- Un jeune homme chantait
- Adieu mon coeur
- Comme moi
- Les amants
Side D:
- Tu es partout
- Le vieux piano
- De l'autre côté de la rue
- Y'a pas d'printemps
- Les flons flons du bal
- Mon manège à moi
Direct Metal Mastering
In Direct Metal Mastering, the cutting lathe engraves the audio signal directly onto a copper-plated master disc, instead of engraving the groove into a lacquer-coated aluminum disc.
The direct metal mastering technology addresses the lacquer mastering technology's issue of pre-echoes during record play, caused by the cutting stylus unintentionally transferring some of the subsequent groove wall's impulse signal into the previous groove wall. In particular, a quiet passage followed by a loud sound often clearly revealed a faint pre-echo of the loud sound occurring 1.8 seconds ahead of time (the duration of one revolution at 33 rpm). This problem could also appear as post-echo, 1.8 seconds after a peak in volume.
Another improvement is noise reduction. The lacquer mastering method bears a higher risk of adding unwanted random noise to the recording, caused by the enclosure of small dust particles when spraying the silvering on the lacquer master, which is the necessary first step of the electroplating process for reproduction of the master disc. As the DMM master disc is already made of metal (copper), this step is not required, and its faults are avoided.
With the groove being cut straight into a metal foil, this removed a number of plating stages in the manufacturing process. This gave rise to more upper frequency levels and less surface noise. Additionally, groove pre-echo problems are significantly diminished. Bass is typically tight and well defined, even described as more accurate than the fat, mushy sound of lacquered vinyl pressings.
Ratings :
Discogs : 4.53 / 5